Yzf R3

All recall notices.

1. THE VIN NUMBER MENTIONED ON THE PRODUCTION PLATE DOES NOT MATCH WITH THE ACTUAL VIN NUMBER OF THE VEHICLE

   RM/2020/051 · 14 Jan 2021

   14 Jan 2021

   Defect

   The VIN number mentioned on the Production plate may not match with the actual VIN number of the vehicle.

   Remedy

   Check and if necessary replace the Production plate/label.

   Build window

   Built 1 Jan 2019 – 31 Oct 2020

   ~3,804 vehicles affected

2. THE REAR REFLECTOR DOES NOT MEET THE STANDARDS SPECIFIED BY UN-ECE FOR REFLECTION LUMINOSITY

   RM/2020/037 · 6 Oct 2020

   6 Oct 2020

   Defect

   The rear reflector does not meet the standards specified by UN-ECE for reflection luminosity.

   Remedy

   The affected units should have the Rear Reflector replaced by countermeasure ones.

   Build window

   Built 15 Jan 2015 – 20 Mar 2020

   ~14,834 vehicles affected

3. THE HOLDER BRAKE HOSES 3 AND 4 COULD DETACH FROM THE FRONT FORK BRACKET

   RM/2020/028 · 21 Feb 2020

   21 Feb 2020

   Defect

   A Brake hose may touch the front fork outer tube and could wear out.

   Remedy

   The affected units should have the brake hose brackets replaced by countermeasure ones.

   Build window

   Built 1 Dec 2018 – 28 Feb 2019

   ~80 vehicles affected

4. POSSIBLE WEAR TO BRAKE HOSE 1 BY RUBBING TO HORN LEAD WIRE

   RM/2020/027 · 21 Feb 2020

   21 Feb 2020

   Defect

   A brake hose has a possibility to wear by rubbing to horn lead wire.

   Remedy

   The affected units should have the horn lead wire re-routed according to new specifications.

   Build window

   Built 1 Dec 2018 – 28 Feb 2019

   ~80 vehicles affected

5. THE BRAKE LEVER MAY BREAK DUE TO AN INCORRECT MOULDING PROCESS

   RM/2020/024 · 26 Apr 2019

   26 Apr 2019

   Defect

   The brake lever may break due to an incorrect molding process.

   Remedy

   Affected units must have the brake lever replaced with the countermeasure part.

   Build window

   Built 29 Jan 2019 – 6 Mar 2019

   ~40 vehicles affected

6. FUEL MAY LEAK

   RM/2017/008 · 24 Feb 2017

   24 Feb 2017

   Defect

   It has been identified that the dimensions of the fitting bracket which secures the fuel tank to the frame are incorrect and this can cause the bracket to contact the fuel tank. This may result in engine vibration being resonance being transmitted to the fuel tank. This can cause the spot weld of the tank cover stay to fail which can cause due to transmitted through the stay. In the worst case fuel may leak.

   Remedy

   Recall all affected machine to change the fuel tank fitting bracket.

   Build window

   Affected build dates not specified

   ~897 vehicles affected

7. MAIN SWITCH ELECTRIC TERMINAL MAY CORRODE

   RM/2017/009 · 24 Feb 2017

   24 Feb 2017

   Defect

   It has been identified that water/moisture can enter the Sub-Switch Assembly and contaminate the main switch circuit board. This can possibly cause corrosion of the main switch electric terminal. In the worst case this can result in the electrical supply being cut and could cause the engine to stall whilst the machine is being ridden.

   Remedy

   Recall all known machines to replace the Sub-Switch Assembly with a new Quality Product.

   Build window

   Affected build dates not specified

   ~897 vehicles affected

8. RIDER MAY BE UNABLE TO SELECT GEARS AND / OR ENGINE MAY SEIZE

   RM/2016/034 · 8 Jul 2016

   8 Jul 2016

   Defect

   The clutch release bearing may not be to specification which can result in difficult clutch and gear use. Additionally the oil pump pressure relief valve may not be to specification which can result in broken gear and reduced lubrication and potentially to engine seizure and loss of machine control.

   Remedy

   Recall the machines that are likely to be affected and replace the clutch pressure plate and oil pump assemblies with remedial parts.

   Build window

   Built 1 Jan 2015 – 31 Mar 2016

   ~684 vehicles affected