Yzf R1

All recall notices.

1. THE ENGINE CONTROL UNIT CANNOT DETECT AN ERROR OF ATMOSPHERIC PRESSURE SENSOR

   RM/2021/009 · 23 Mar 2021

   23 Mar 2021

   Defect

   The engine control unit cannot detect an error of atmospheric pressure sensor.

   Remedy

   Affected units must have the engine control unit reprogrammed

   Build window

   Built 1 Jul 2019 – 28 Feb 2021

   ~467 vehicles affected

2. GEARBOX MAY FAIL

   RM/2015/041 · 9 Dec 2015

   9 Dec 2015

   Defect

   Under extreme conditions certain gearbox components may break or deform causing a loss of drive. This can elevate the risk of collision.

   Remedy

   Recall the machines that are likely to be affected and replace the transmission assembly which includes modified component parts.

   Build window

   Affected build dates not specified

   ~624 vehicles affected

3. RISK OF FIRE

   RM/2015/028 · 11 Sep 2015

   11 Sep 2015

   Defect

   It is possible for an oil leak to occur from the O-Ring on the Oil Delivery Pipe where it enters the engine case because of improper assembly of the components. If a leak occurs oil could leak onto the exhaust and in extreme circumstances the oil could catch fire.

   Remedy

   Recall the machines that are likely to be affected and replace the Oil Delivery Pipe O-Ring.

   Build window

   Affected build dates not specified

   ~146 vehicles affected

4. POSSIBILITY OF LOSS OF CONTROL

   RM/2015/013 · 24 Apr 2015

   24 Apr 2015

   Defect

   The rear shock absorber piston rod nut may come loose. The shock absorber performance may be affected possibly causing a loss of machine control. The manufacturer recomends the machine is not ridden until the concern is assessed and where necessary repaired.

   Remedy

   Recall the machines that are likely to be affected and check if the machine is fitted with an affected shock absorber. Where an affected unit is fitted the complete shock absorber will be replaced.

   Build window

   Built 1 Dec 2014 – 31 Mar 2015

   ~23 vehicles affected

5. HEADLIGHT MAY MALFUNCTION

   RM/2014/005 · 24 Feb 2014

   24 Feb 2014

   Defect

   In certain circumstances the headlamp wiring coupler may overheat which in the worst case can cause the headlamp to fail

   Remedy

   Recall the machines that are likely to be affected to replace the wiring sub harness to the headlamp.

   Build window

   Affected build dates not specified

   ~3,936 vehicles affected

6. ENGINE IDLE SPEED MAY NOT RETURN TO NORMAL

   RM/2013/031 · 18 Nov 2013

   18 Nov 2013

   Defect

   Under certain circumstances a poor connection between APS and TPS may cause an incorrect signal to the ECU which in extreme cases may result in the engine idle speed not returning to the specified level even when the throttle is closed.

   Remedy

   Recall the vehicles that are likely to be affected to add a sub-lead to bypass the potentially poor connection.

   Build window

   Built 1 Jan 2010 – 31 Dec 2010

   ~139 vehicles affected

7. ENGINE MAY STALL

   RM/2006/038 · 18 Oct 2006

   18 Oct 2006

   Defect

   The idle speed of the engine may become intermittently unstable. In rare cases this may result in the engine stalling when the machine is stationery or at low speed

   Remedy

   Recall affected machines and check Throttle Position Sensor.If necessary fit revised part.

   Build window

   Built 1 Jan 2004 – 31 Dec 2005

   ~14,384 vehicles affected

8. BOND BETWEEN BRAKE PAD MATERIAL AND BACKING PLATE MAY FAIL

   RM/2000/009 · 15 Mar 2000

   15 Mar 2000

   Defect

   A) There is a possibility that the bond between the brake pad material and its backing plate on the original/standard front brake pad may become weakened due to corrosion and eventually may fail with a possible loss of braking ability from the front brake

   Remedy

   A) Recall affected machines and replace front brake pads with a modified type.

   Build window

   Built 1 Jan 1998 – 31 Dec 1999

   ~6,900 vehicles affected

9. SIDE STAND SWITCH MAY NOT FUNCTION CORRECTLY

   RM/2000/010 · 15 Mar 2000

   15 Mar 2000

   Defect

   There is a possibility that the screws holding the side stand switch may vibrate loose and eventually fall out. The switch would not then function correctly and it may be possible to start the engine and ride the machine with the side stand down.

   Remedy

   Recall affected machines to replace screws holding the side stand switch with a combination of bolts and nuts.

   Build window

   Built 1 Jan 1998 – 31 Dec 2000

   ~14,885 vehicles affected

10. POSSIBLE FAILURE OF PRIMARY DRIVE GEAR BACK PLATE

    RM/98/010 · 29 Sep 1998

    29 Sep 1998

    Defect

    Yamaha Motor Co. have identified a potential defect with the back plate of the primary drive gear which may cause it to fail under certain conditions of use. In exceptional circumstances this may cause the engine to lock.

    Remedy

    Recall affected machines and replace the primary drive gear with a quality assured unit.

    Build window

    Built 1 Jan 1998 – 31 Dec 1998

    ~3,095 vehicles affected