MT

All recall notices.

1. HANDLEBAR MOUNTING/S MAY DETACH

   RM/2017/013 · 17 Apr 2017

   17 Apr 2017

   Defect

   The lower handlebar holder may have been manufactured with improper painting instruction and thread locking agent may not have been adequately applied to the stud bolt thread of the lower handlebar holder. Due to this the stud bolt may loosen and fall off from engine vibration resulting in loss of control.

   Remedy

   Recall the machines that are likely to be affected and replace the lower handlebar holders with the countermeasure parts.

   Build window

   Affected build dates not specified

   ~7,625 vehicles affected

2. FUEL MAY LEAK

   RM/2017/008 · 24 Feb 2017

   24 Feb 2017

   Defect

   It has been identified that the dimensions of the fitting bracket which secures the fuel tank to the frame are incorrect and this can cause the bracket to contact the fuel tank. This may result in engine vibration being resonance being transmitted to the fuel tank. This can cause the spot weld of the tank cover stay to fail which can cause due to transmitted through the stay. In the worst case fuel may leak.

   Remedy

   Recall all affected machine to change the fuel tank fitting bracket.

   Build window

   Affected build dates not specified

   ~897 vehicles affected

3. MAIN SWITCH ELECTRIC TERMINAL MAY CORRODE

   RM/2017/009 · 24 Feb 2017

   24 Feb 2017

   Defect

   It has been identified that water/moisture can enter the Sub-Switch Assembly and contaminate the main switch circuit board. This can possibly cause corrosion of the main switch electric terminal. In the worst case this can result in the electrical supply being cut and could cause the engine to stall whilst the machine is being ridden.

   Remedy

   Recall all known machines to replace the Sub-Switch Assembly with a new Quality Product.

   Build window

   Affected build dates not specified

   ~897 vehicles affected

4. HEADLIGHT MAY FAIL

   RM/2014/023 · 22 Sep 2014

   22 Sep 2014

   Defect

   Under certain circumstances the headlight wiring harness may become taut on full steering lock. This over time could result in the eventual disconnection of the harness or even failure of the harness. This can cause the failure of the headlight while in use.

   Remedy

   Recall all affected machines to fit an additional sub lead

   Build window

   Affected build dates not specified

   ~1,499 vehicles affected

5. REAR VIEW MIRROR MAY DETACH

   RM/2008/039 · 30 Sep 2008

   30 Sep 2008

   Defect

   Under certain circumstances due to vibration a crack may develop at the rear view mirror pivot point and in extreme cases the mirror head(s) may become detached causing a safety issue primarily to other road users or bystanders.

   Remedy

   Recall the machines that are likely to be affected to replace the rear view mirrors with ones that have been modified.

   Build window

   Affected build dates not specified

   ~303 vehicles affected

6. SUSPENSION MAY FAIL

   RM/2007/034 · 10 Aug 2007

   10 Aug 2007

   Defect

   Rear suspension relay arm bearing housing may weaken by ingress of water and particularly when exposed to road salt in the Winter months. If not rectified this concern could lead to the failure of the rear suspension.

   Remedy

   Recall the machines that are likely to be affected to replace the suspension link arm and associated components.

   Build window

   Affected build dates not specified

   ~816 vehicles affected

7. WATER INGRESS INTO MAIN WIRING HARNESS

   RM/2007/005 · 19 Feb 2007

   19 Feb 2007

   Defect

   It has been identified that under certain circumstances such as heavy rain or cleaning with a high pressure washer. Water may enter the main wiring harness giving the potential to create engine running problems.

   Remedy

   Recalled machines will have the subject wiring checked and replaced as necessary.

   Build window

   Affected build dates not specified

   ~634 vehicles affected

8. SIDE STAND MAY FAIL

   RM/2007/006 · 19 Feb 2007

   19 Feb 2007

   Defect

   Under certain circumstances the side-stand bracket may break possibly causing the motorcycle to fall over if resting on the stand at the time.

   Remedy

   Recall the machines that are likely to be affected to replace the side stand bracket and to check and where necessary replace the wiring harness.

   Build window

   Affected build dates not specified

   ~634 vehicles affected

9. ENGINE MAY STALL

   RM/2006/038 · 18 Oct 2006

   18 Oct 2006

   Defect

   The idle speed of the engine may become intermittently unstable. In rare cases this may result in the engine stalling when the machine is stationery or at low speed

   Remedy

   Recall affected machines and check Throttle Position Sensor.If necessary fit revised part.

   Build window

   Built 1 Jan 2005 – 31 Dec 2005

   ~14,384 vehicles affected