Maserati

Levante

16 UK vehicle recalls on record for this model, listed most recent first.

If your Levante is covered by any of these notices, contact your authorised Maserati dealer. All recall work is carried out free of charge.

Notices on record

Maserati Levante · DVSA register

All recall notices.

ELECTRICAL CONNECTIONS OF 48 VOLT POWER SYSTEM MIGHT NOT BE PROPERLY TIGHTENED

R/2022/188 · 15 Jun 2022

15 Jun 2022

Defect

Possible insufficient tightening on electrical connections of 48 volt power system.

Remedy

Gain access to the battery system and check tightness of connections to the 48 volt power system. resecure if required.

Build window

Built 21 Jul 2021 – 26 Mar 2022

~6 vehicles affected
POSSIBLE GEARBOX ELECTRICAL CABLE CONTACT WITH CATALYST THERMAL SHIELD.

R/2022/189 · 15 Jun 2022

15 Jun 2022

Defect

Possible gearbox electrical cable contact with Catalyst thermal shield.

Remedy

Check and ensure the correct positioning of the gearbox wiring harness in relation to the catalytic convertor shield if required replace the wiring harness.

Build window

Built 14 Apr 2022 – 19 Apr 2022

~1 vehicles affected
SUPPLY CABLES FOR THE 48 VOLT BATTERY SYSTEM HAVE AN INCORRECT TIGHTENING TORQUE

R/2022/159 · 16 May 2022

16 May 2022

Defect

Supply cables for the 48Volt battery system have an incorrect tightening torque.

Remedy

Inspect and retighten cable fixing screws for the 48Volt battery system.

Build window

Built 24 Aug 2021 – 24 Sep 2021

~122 vehicles affected
THE TAIL LAMP MAY START FLICKERING WHEN RECEIVING A VOLTAGE CLOSE TO THE MAXIMUM (16V)

R/2022/138 · 22 Apr 2022

22 Apr 2022

Defect

When the tail-lamp is receiving a voltage close to the maximum (16V) the tail-lamp may start flickering.

Remedy

Check the production date of the tail-lamps if the fitted lamps are within the defective range replacement of the rear lamp/lamps will be required.

Build window

Built 24 Jan 2022

~20 vehicles affected
WRONG TYPE VARIANT VERSION ON STATUTORY PLATE.

R/2021/441 · 3 Dec 2021

3 Dec 2021

Defect

Wrong TVV (Type-Variant-Version) on statutory plate.

Remedy

Replace label located on B Pillar

Build window

Built 28 Sep 2021 – 30 Sep 2021

~37 vehicles affected
POSSIBLE FUEL LEAKAGE IN ENGINE BAY

R/2021/406 · 15 Nov 2021

15 Nov 2021

Defect

A deviation of the P/T sensor moulding process of the plastic housing. Possible Fuel Leakage in engine bay Loss of power potential fire risk in worst case.

Remedy

Replacement of the short fuel line containing the pressure sensor.

Build window

Built 28 Jan 2021 – 27 Oct 2021

~58 vehicles affected
EXHAUST ACTIVE VALVE CABLE MAY SHORT CIRCUIT DUE TO CONTACT WITH THE EXHAUST SYSTEM

R/2021/388 · 12 Oct 2021

12 Oct 2021

Defect

Exhaust active valve cable may short circuit due to contact with the exhaust system.

Remedy

Check cable layout reposition and repair if necessary.

Build window

Built 24 Aug 2021 – 16 Sep 2021

~56 vehicles affected
INCORRECT AUTOMATIC TIGHTENING OF AN ELECTRICAL CABLE ON PRODUCTION

R/2021/389 · 12 Oct 2021

12 Oct 2021

Defect

Incorrect automatic tightening of an electrical cable on production.

Remedy

Check and retighten the connection.

Build window

Built 13 Jul 2021 – 22 Sep 2021

~3 vehicles affected
THE ELECTRONIC POWER STEERING FUNCTION MAY NOT BE AVAILABLE

R/2021/195 · 28 Apr 2021

28 Apr 2021

Defect

The Electronic Power Steering function may not be available.

Remedy

Replacement of steering rack.

Build window

Built 9 Apr 2021

~11 vehicles affected
FRONT TYRES OUTER TREAD MAY HAVE BEEN DAMAGED

R/2021/196 · 23 Apr 2021

23 Apr 2021

Defect

Front tyres outer tread may have been damaged.

Remedy

Check and replace tyre if required

Build window

Built 23 Mar 2021 – 29 Mar 2021

~7 vehicles affected
THE FINAL PART OF THE VEHICLE VERSION DISPLAYED ON THE MANUFACTURER LABEL ON THE A PILLAR CONTAINS INCORRECT VERSION INFORMATION

R/2020/180 · 16 Mar 2020

16 Mar 2020

Defect

Incorrect sticker shows data M1561F4 5W correct version is M1561F 4APD.

Remedy

Replacement of the sticker label.

Build window

Built 9 Jan 2019 – 3 Feb 2019

~1 vehicles affected
FRONT HEADLAMPS FULL LED VERSION HEADLAMP VERTICAL BEAM OUT OF COMPLIANCE

R/2019/239 · 24 Jul 2019

24 Jul 2019

Defect

Front headlamps full LED version headlamp vertical beam out of compliance.

Remedy

Check and adjustment of the front headlamp vertical beam.

Build window

Built 11 Aug 2017 – 21 Feb 2019

~320 vehicles affected
BLIND SPOT DETECTION SYSTEM HAS BEEN MARKED WITH INCORRECT ECE CERTIFICATION LABELLING

R/2019/199 · 25 Jun 2019

25 Jun 2019

Defect

Blind spot detection system has been marked with the wrong ECE certification labelling.

Remedy

Attaching the correct label to the left and right rear blind spot sensors and within the owners quick reference guide.

Build window

Built 10 Oct 2018 – 12 Oct 2018

~11 vehicles affected
POSSIBLE INCORRECT WELDING

R/2018/179 · 11 Jun 2018

11 Jun 2018

Defect

Possible incorrect welding due to human error of the 4 sections of the front engine under frame. This has been caused by an interruption in the welding process Possible brake of the welds Sub-frame can lost the correct alignment and the vehicle could lose the stability

Remedy

Inspection of the welded points if welding Is defective replacement of the front sub-frame required

Build window

Built 4 Dec 2017

~1 vehicles affected
UNEXPECTED LOSS OF ENGINE POWER

R/2017/236 · 3 Aug 2017

3 Aug 2017

Defect

The short hose on the pipe between the turbocharger and the intercoolers could break during the normal use of the vehicle. This could result in loss of performance and cause the check engine light to illuminate as the hose material may not conform to manufacturers specification.

Remedy

Replace the short hose on the pipe between the turbocharger and the intercoolers. In some cases the replacement of the entire intercooler pipe will be necessary; this will be determined by the VIN number.

Build window

Built 19 Sep 2016 – 2 Jan 2017

~125 vehicles affected
POSSIBLE SHORT CIRCUIT OF DRIVER SEAT WIRING

R/2017/235 · 10 Jul 2017

10 Jul 2017

Defect

Some vehicles may have been manufactured with an incorrect driver seat wiring harness layout which can cause the seat wiring harness to rub against metal points on the seat/seat frame assembly through normal seat adjustment operation. Over time this can lead to an inoperative seat adjustment system and in rare cases a potential risk of fire due to an electrical short to ground between the seat wiring harness and the seat adjustment motor assembly.

Remedy

Replace 2 seat circuit breakers with 25 amp mini-fuses check harness apply protective barrier and reposition if undamaged. If damaged replace harness and then ensure repositioned and protective barrier applied.

Build window

Built 7 Feb 2013 – 24 Nov 2016

~3,844 vehicles affected

Data from the DVSA Vehicle Recall register (Crown Copyright, Open Government Licence v3.0). Last indexed: 2026-04-26.

These records are provided for reference. Contact your authorised Maserati dealer or check your vehicle registration at gov.uk/check-if-a-vehicle-has-outstanding-recalls to confirm current status.

All makes

Click Mechanic · affiliate

Recall remedy booked. Mechanic next?

Affiliate links — small commission, no extra cost to you.

Mobile mechanic · UK-wide

Book a mechanic at your door.

Fixed-price quotes upfront. No garage needed. Click Mechanic sends a vetted local mechanic to you — home, work, or roadside.

Get a quote →