Gallardo Spyder

All recall notices.

1. VEHICLES MIGHT HAVE FOLLOWED A WRONG PROCEDURE TO PERFORM THE REFLASH OF THE ENGINE SOFTWARE OF THE ENGINE ECU

   R/2021/374 · 21 Dec 2018

   21 Dec 2018

   Defect

   Vehicles might have followed a wrong procedure to perform the reflash of the engine software of the engine ECU.

   Remedy

   Reflash the engine software with appropriate procedure.

   Build window

   Built 13 Dec 2011 – 20 Jan 2012

   ~258 vehicles affected

2. REAR BRAKE DISCS MAY DETACH

   R/2013/111 · 4 Oct 2013

   4 Oct 2013

   Defect

   On vehicles fitted with carbon ceramic brakes the stainless steel screws fixing the rotor to the metal bell may fail due to stress corrosion cracking if the vehicle has been used in extreme salt environments. The customer will experience a noise when a screw fails and the brake continues to be 100% effective. However if the affected disc was to lose 8 of the 10 screws there would be a loss of braking at that wheel. Although the maximum bolt failure worldwide has been 3 theoretically the concern could lead to an increase in stopping distance and a collision.

   Remedy

   Recall the vehicles that are likely to be affected to replace the affected stainless steel screws with a screw of a different material that is not susceptible to stress corrosion cracking.

   Build window

   Built 10 Jan 2007 – 13 May 2009

   ~143 vehicles affected

3. RISK OF FIRE

   R/2012/096 · 1 Oct 2012

   1 Oct 2012

   Defect

   As part of continuous product monitoring Automobili Lamborghini Spa has found that in rare cases of persistent severe load conditions and mechanical stress due to fluid pressure into the power steering system a little hole might develop in the pipe. This could result in a small fluid leakage.

   Remedy

   Replace the power steering high pressure line.

   Build window

   Built 30 Sep 2005 – 14 Apr 2008

   ~291 vehicles affected