SX

All recall notices.

1. CHAIN CONNECTING LINK MAY FAIL

   RM/2017/011 · 3 Mar 2017

   3 Mar 2017

   Defect

   The drive chain connecting link is not manufactured to specification which can lead to premature failure of the connecting link possible consequential damage and loss of drive.

   Remedy

   Recall the machines that are likely affected and replace the drive chain connecting link.

   Build window

   Built 8 Feb 2017

   ~1 vehicles affected

2. FRONT WHEEL MAY FAIL

   RM/2015/042 · 21 Dec 2015

   21 Dec 2015

   Defect

   Due to variations in the spoke manufacturing process some spokes on the front wheel may exhibit quality deviations. Depending on where they are fitted in the wheel care and spoke tension it is possible that individual spokes may break while riding. This can overload the remaining intact spokes and consequently cause them to break which can affected the stability of the machine.

   Remedy

   Recall the machines that are likely to be affected and replace the spokes that are fitted to the front wheel.

   Build window

   Built 30 Apr 2015 – 18 Sep 2015

   ~655 vehicles affected

3. THROTTLE MAY NOT RETURN TO IDLE

   RM/2013/009 · 16 Apr 2013

   16 Apr 2013

   Defect

   Due to a production fault on the upper part of the throttle grip housing the throttle cable wire may slide out of the deflection roller and become wedged between the deflection roller and the housing. This blocks the throttle slide and may result in an uncontrollable riding situation.

   Remedy

   Recall the vehicles that are likely to be affected to replace the upper part of the hand throttle control housing the deflector roller and bronze bushing.

   Build window

   Affected build dates not specified

   ~1,468 vehicles affected

4. RISK OF FIRE

   RM/2012/027 · 7 Nov 2012

   7 Nov 2012

   Defect

   Fuel may leak onto hot engine/exhaust components because of pin-prick holes that can develop in the pre-formed fuel pipes. In the worst cases this could lead to fire.

   Remedy

   Recall the machines that are likely to be affected to replace the preformed fuel hoses.

   Build window

   Affected build dates not specified

   ~253 vehicles affected

5. FRONT FORK TUBE MAY BE BRITTLE

   RM/2009/014 · 8 Apr 2009

   8 Apr 2009

   Defect

   The suspension inner forks may crack and lose fluid as a result of the metal being brittle. Should this occur the suspension will not operate correctly.

   Remedy

   Recall the machines that are likely to be affected to replace both the fork legs.

   Build window

   Affected build dates not specified

   ~54 vehicles affected

6. REAR BRAKE MAY NOT OPERATE

   RSPV/2009/005 · 9 Feb 2009

   9 Feb 2009

   Defect

   The rear brake calliper support bracket may fracture and the calliper can become insecure.

   Remedy

   Recall affected machines and replace calliper mounting with revised type.

   Build window

   Built 1 Nov 2007 – 31 Jul 2008

   ~59 vehicles affected

7. FRONT BRAKE OPERATION MAY BE AFFECTED

   RSPV/2009/004 · 9 Feb 2009

   9 Feb 2009

   Defect

   There is a possibility that the main actuating piston in the front brake master cylinder may not return to its fully returned position.

   Remedy

   Recall affected machines and replace piston return spring.

   Build window

   Built 1 Nov 2007 – 31 Jul 2008

   ~59 vehicles affected

8. FUEL MAY LEAK

   RM/2007/043 · 12 Nov 2007

   12 Nov 2007

   Defect

   Under certain circumstances it is possible that if the customers do not properly secure the fuel cap or if it is knocked by the rider's body during off road use then the fuel tank cap may leak and allow fuel to leak over the rider and engine.

   Remedy

   To overcome this issue the manufacturer is to recall the likely affected machines to fit a new design of self locking fuel cap.

   Build window

   Built 1 Aug 2005 – 30 Apr 2007

   ~2,004 vehicles affected