Exc

All recall notices.

1. BRAKING PERFORMANCE MAY BE REDUCED

   RM/2016/039 · 9 Sep 2016

   9 Sep 2016

   Defect

   Anomalies in the manufacturing process have resulted in certain batches of hand brake cylinders with defective machining. This can lead to early wear of the sealing cup in the hand brake cylinder thus leading to impaired braking performance.

   Remedy

   Recall the machines that are likely to be affected and check the batch number of the hand brake cylinder. If the batch number appears on the affected list replace the hand brake cylinder.

   Build window

   Built 7 Jun 2016 – 4 Jul 2016

   ~439 vehicles affected

2. PISTON ROD MAY DETACH

   RM/2014/035 · 5 Nov 2014

   5 Nov 2014

   Defect

   The forks may not have been correctly assembled which could lead to initially knocking and the damping in the affected strut decreasing. If the condition is allowed to progress the inside of the fork will be damaged and the fork may seize.

   Remedy

   Recall the machines that are likely to be affected and remove the fork cap. Check the locking nut for correct torque and tighten if necessary.

   Build window

   Built 16 Jun 2014 – 10 Oct 2014

   ~475 vehicles affected

3. THROTTLE MAY NOT RETURN TO IDLE

   RM/2013/009 · 16 Apr 2013

   16 Apr 2013

   Defect

   Due to a production fault on the upper part of the throttle grip housing the throttle cable wire may slide out of the deflection roller and become wedged between the deflection roller and the housing. This blocks the throttle slide and may result in an uncontrollable riding situation.

   Remedy

   Recall the vehicles that are likely to be affected to replace the upper part of the hand throttle control housing the deflector roller and bronze bushing.

   Build window

   Affected build dates not specified

   ~1,468 vehicles affected

4. RISK OF FIRE

   RM/2012/027 · 7 Nov 2012

   7 Nov 2012

   Defect

   Fuel may leak onto hot engine/exhaust components because of pin-prick holes that can develop in the pre-formed fuel pipes. In the worst cases this could lead to fire.

   Remedy

   Recall the machines that are likely to be affected to replace the preformed fuel hoses.

   Build window

   Affected build dates not specified

   ~253 vehicles affected

5. FRONT FORK TUBE MAY BE BRITTLE

   RM/2009/014 · 8 Apr 2009

   8 Apr 2009

   Defect

   The suspension inner forks may crack and lose fluid as a result of the metal being brittle. Should this occur the suspension will not operate correctly.

   Remedy

   Recall the machines that are likely to be affected to replace both the fork legs.

   Build window

   Affected build dates not specified

   ~54 vehicles affected

6. FUEL MAY LEAK

   RM/2007/043 · 12 Nov 2007

   12 Nov 2007

   Defect

   Under certain circumstances it is possible that if the customers do not properly secure the fuel cap or if it is knocked by the rider's body during off road use then the fuel tank cap may leak and allow fuel to leak over the rider and engine.

   Remedy

   To overcome this issue the manufacturer is to recall the likely affected machines to fit a new design of self locking fuel cap.

   Build window

   Built 1 Aug 2005 – 30 Apr 2007

   ~2,004 vehicles affected