Touring

All recall notices.

1. Certain machines may exhibit a condition that can result in the brake lamp(s) remaining illuminated regardless of whether the service brakes are applied.

   RM/2022/030 · 26 Oct 2022

   26 Oct 2022

   Defect

   Certain machines may exhibit a condition that can result in the brake lamp(s) remaining illuminated regardless of whether the service brakes are applied.

   Remedy

   Owners of affected machines will be advised to make arrangements with an authorised Harley-Davidson dealer who will perform the remedy at no charge to the customer. Dealers will apply a software update to affected Touring and CVO Touring vehicles. Dealers will apply a software update and install a new pressure switch on affected Trike and CVO Trike vehicles.

   Build window

   Built 2 Jul 2019 – 23 Jun 2022

   ~2,807 vehicles affected

2. AIR INGRESS INTO THE HYDRAULIC CLUTCH SLAVE CYLINDER MAY CAUSE A FAILURE TO GENERATE SUFFICIENT LIFT TO DISENGAGE CLUTCH FULLY

   RM/2018/036 · 9 Nov 2018

   9 Nov 2018

   Defect

   Air ingress to the hydraulic clutch slave cylinder causing insufficient disengagement.

   Remedy

   Replace cluch slave cylinder piston and seal.

   Build window

   Built 6 Mar 2016 – 17 Jun 2017

   ~1,965 vehicles affected

3. POTENTIAL LOSS OF BRAKE FUNCTION ON BIKES FITTED WITH ABS

   RM/2018/011 · 6 Mar 2018

   6 Mar 2018

   Defect

   If the brake fluid has not been changed as per manufacturer's instructions deposits may form which may affect the operation of the ABS module. Continued use may lead to loss of braking.

   Remedy

   On affected vehicles flush the brake systems and replace with an uprated specification fluid.

   Build window

   Built 25 Jun 2006 – 13 Dec 2011

   ~3,050 vehicles affected

4. OIL LINE MAY DETACH

   RM/2017/021 · 1 Jul 2017

   1 Jul 2017

   Defect

   An oil line may not have been correctly clamped which may allow oil to leak.

   Remedy

   On affected machines check for correct installation of the clamp. where necessary replace clamp.

   Build window

   Built 2 May 2016 – 9 May 2017

   ~295 vehicles affected

5. LOSS OF CONTROL

   RM/2016/037 · 29 Jul 2016

   29 Jul 2016

   Defect

   Hydraulic clutch master cylinder may fail to disengage engine on initial gear engagement leading to the machine lurching forward and falling over. This condition gives an elevated risk of injury to the rider and bystanders.

   Remedy

   Recall the machines that are likely to be affected to inspect and clean the clutch master cylinder piston. Where necessary the master cylinder piston will be replaced.

   Build window

   Built 17 Jul 2015 – 31 Mar 2016

   ~513 vehicles affected

6. REAR BRAKE SWITCH MAY FAIL

   RM/2011/031 · 23 Jan 2012

   23 Jan 2012

   Defect

   The rear brake lamp switch may become exposed to temperatures that degrade its performance. This condition may affect brake lamp function and /or cause a brake fluid leak through the rear brake switch affecting rear brake performance.

   Remedy

   Recall the machines that are likely to be affected to check and where necessary replace the rear brake lamp switch using the recall kit.

   Build window

   Built 6 Jun 2008 – 16 Sep 2011

   ~1,916 vehicles affected

7. FUEL TAP READS INCORRECTLY

   RM/2006/010 · 28 Feb 2006

   28 Feb 2006

   Defect

   Certain 2004 model year carburettor equipped motorcycles have been fitted with a fuel tap where the 'On' and 'Reserve' markings have been transposed.

   Remedy

   Replace the fuel valve (tap).

   Build window

   Affected build dates not specified

   ~159 vehicles affected

8. TAIL LAMP MAY BECOME LOOSE

   RM/2006/014 · 28 Feb 2006

   28 Feb 2006

   Defect

   The tail lamp bulb may become loose in its mounting socket.

   Remedy

   Recall the machines that are likely to be affected and replace the tail lamp bulb with a re-designed bulb.

   Build window

   Built 1 Jun 2003 – 31 Aug 2003

   ~520 vehicles affected

9. ELECTRICAL CIRCUIT FAILURE

   RM/2006/013 · 28 Feb 2006

   28 Feb 2006

   Defect

   It has been identified that the subject machines have been fitted with a sub-standard 40amp circuit.

   Remedy

   Recalled machines will have the circuit breaker replaced.

   Build window

   Built 1 Jan 1999 – 31 Dec 2003

   ~341 vehicles affected