Monster

All recall notices.

1. THE FLOATING PISTON IN THE FRONT BRAKE MASTER CYLINDER MAY CRACK

   RM/2018/001 · 16 Jan 2018

   16 Jan 2018

   Defect

   Because of a manufacturing fault the floating piston in the front brake master cylinder may crack under high stress conditions typical of track use frequent ABS interventions or if a machine is dropped. This could reduce the efficiency of the front brake.

   Remedy

   On affected machines replace the floating piston in the front brake master cylinder with a modified version.

   Build window

   Built 1 Sep 2015 – 15 Jan 2018

   ~3,504 vehicles affected

2. LOSS OF REAR BRAKING EFFICIENCY

   RM/2012/008 · 25 Apr 2012

   25 Apr 2012

   Defect

   There is a potential for the friction material on the rear brake pads to come away from the brake pad due to a fault in the adhesion. There is a possibility if ignored the brake pads will deteriorate leading to a loss of rear brake efficiency.

   Remedy

   Affected brake pads will be replaced.

   Build window

   Affected build dates not specified

   ~52 vehicles affected

3. WHEEL MAY CRACK

   RM/2012/007 · 20 Mar 2012

   20 Mar 2012

   Defect

   Tests have shown that after high mileage small cracks can appear on the hub section of the rear wheel. If these cracks are ignored the wheel could eventually collapse.

   Remedy

   Recall the machines that are likely to be affected to replace the rear wheel with one of a higher specification.

   Build window

   Affected build dates not specified

   ~240 vehicles affected

4. FUEL MAY LEAK

   RM/2012/001 · 17 Jan 2012

   17 Jan 2012

   Defect

   Due to nonconformity of the of the fuel lines it is possible that a slight fuel leak could develop.

   Remedy

   Recall the machines that are likely to be affected to replace the fuel pipes and where necessary refit the flange bolts with thread locking compound.

   Build window

   Built 1 Jan 2011 – 16 Jan 2012

   ~101 vehicles affected

5. FUEL MAY LEAK CAUSING THE ENGINE TO STALL

   RM/2010/016 · 22 Jul 2010

   22 Jul 2010

   Defect

   The fuel pump flange and fuel tank coupling may not be to specification and therefore leak fuel. The ensuing leak will eventually cause the engine to stall.

   Remedy

   Recall the machines that are likely to be affected to check the serial number identifying the tank. If the serial number corresponds to faulty items then it will be replaced with a new tank.

   Build window

   Affected build dates not specified

   ~31 vehicles affected

6. WIRING MAY CHAFE CAUSING DAMAGE TO SYSTEMS

   RM/2009/012 · 14 Apr 2009

   14 Apr 2009

   Defect

   It has been identified that the main wiring harness may come into contact with the vertical cylinder head this can lead to damage to the harness poor running with random fault codes being displayed.

   Remedy

   Recalled machines will have the subject wiring repositioned and fastened to the frame.

   Build window

   Affected build dates not specified

   ~333 vehicles affected

7. ENGINE MAY FAIL

   RM/2007/037 · 18 Sep 2007

   18 Sep 2007

   Defect

   The engine may overheat because the water pump impeller shaft is of incorrect length and does not engage drive from the timing layshaft.

   Remedy

   Recall the machines that are likely to be affected to check the engagement of the water pump impeller shaft and where necessary replace the water pump assembly.

   Build window

   Affected build dates not specified

   ~11 vehicles affected

8. DETERIORATION OF FUEL LINES

   RM/2001/012 · 1 Jul 2001

   1 Jul 2001

   Defect

   Flexible fuel line connecting the fuel tank flange to the pressure regulator may be liable to premature degradation and subsequently leak.

   Remedy

   Recall affected motorcycles and fit a quality assured replacement fuel line.

   Build window

   Built 1 Jan 2001 – 31 Dec 2001

   ~351 vehicles affected