916

All recall notices.

1. POSSIBLE FLAW IN REAR AXLE

   RM/2000/012 · 20 Jun 2000

   20 Jun 2000

   Defect

   The rear wheel shaft forging may contain a flaw which could cause it to crack and subsequently fail when the motorcycle is being ridden.

   Remedy

   Recall affected motorcycles and ultrasonically check all rear wheel shafts for flaws. Replace with quality assured shafts where appropriate.

   Build window

   From 1 Jan 1994

   ~4,488 vehicles affected

2. ERRATIC THROTTLE OPERATION

   RM/98/004 · 3 Apr 1998

   3 Apr 1998

   Defect

   Throttle action may become erratic due to inadequate lubrication.

   Remedy

   Recall the potentially affected machines disconnect throttle linkage from throttle body lever clean and examine linkage. Lubricate and reassemble. Check for freedom and smoothness of operation.

   Build window

   Built 1 Jan 1995 – 31 Dec 1996

   ~1,007 vehicles affected

3. POSSIBLE SEIZURE OF REAR WHEEL

   RM/97/011 · 30 Sep 1997

   30 Sep 1997

   Defect

   The roller bearings on the rear hub of the subject machines may not have been lubricated when installed. This could lead to bearing seizure and locking of the rear wheel.

   Remedy

   Affected machines are being recalled to have the rear hub bearings inspected. Any bearings which display signs of corrosion or discoloration will be replaced.

   Build window

   Built 1 Jan 1995 – 31 Dec 1997

   ~1,747 vehicles affected

4. POSSIBLE TWISTING OF REAR AXLE

   RM/97/004 · 30 May 1997

   30 May 1997

   Defect

   A) Under extreme circumstances it is possible for the rear axle to twist. b) Throttle linkage may require cleaning and lubrication.

   Remedy

   The affected machines are being recalled for:- A) Replacement of the rear axle with a modified unit. B) At the same time the throttle linkage control pin will be cleaned and lubricated.

   Build window

   Built 1 Jan 1994 – 31 Dec 1995

   ~284 vehicles affected

5. THROTTLE MAY STICK IN OPEN POSITION

   RM/95/004 · 3 Aug 1995

   3 Aug 1995

   Defect

   The teflon bushing may slide out of the throttle cable housing and allow the throttle to stick in the open or partially open condition.

   Remedy

   Recall the affected machines and replace the original throttle cable with a quality assured example.

   Build window

   Affected build dates not specified

   ~228 vehicles affected

6. FAILURE OF SIDE STAND

   RM/96/002 · 10 May 1995

   10 May 1995

   Defect

   The side stand spring retaining plate may fail allowing the side stand to drop and possibly contact the ground.

   Remedy

   Recall the affected machines for the installation of a modified side stand spring plate.

   Build window

   Affected build dates not specified

   ~117 vehicles affected